News

Check out our latest news and blog entries.

A Return to Canyon Road

3.8.14

 

Installation photos of custom doors for a Canyon Road residence in Santa Fe. Features a custom front entry made with an antique French door and custom interior bi-fold doors inset with reclaimed tin1 9945-01-Door-INSTALL

After taking several side trips, we are back on Canyon Road with more installation photos.  We have seen the entry gate, front entry, and the living room.  Now we have three more pieces.  The above door is a sort of secondary front door, leading from an enclosed sun porch.  It began with this antique door.

9945-01-Door-Raw Material

If I had to guess, I would say it is French.  Quite a beauty.  But a bit too tall and narrow for this remodel.  So our job is to deconstruct it and put it back together at a scale that works, both aesthetically and with the house.

9945-01-Door-deconstructed

9945-01-Swag-deconstruct

Below, Leonel & Memo confer.  You can see that the door got a bit of width, and in order to make full use of the beautifully carved swag panel, the flat panel below it is trimmed down to a narrow rectangle.

9945-01-Reconstruct-Leonel-Memo

Here we have Memo, putting it all back together again.

9945-01-Reconstruct-w-Memo

Here it is in the wood shop.

9945-01-Door in wood shop

From the back you can see the contrast between new wood and old.  The door got a new jamb that meets the nice swoop at the top of the door, there is a bit of width added to the door and the shutter is reinforced.

9945-01-Door in shop back

Here it is fresh out of the finish shop and waiting for hardware and glass installation.

9945-01-Door-awaiting-hardware

9945-01-Swag-Detail

9945-01-Door-Grill-detail

I just love that grillwork. The shutter glass was replaced with insulated double-paned glass – custom, of course, with that arched top.  And the door is outfitted with a cast bronze entry set with thumb latch and deadbolt.

9945-01-Shutter-Front

9945-01-Door-Hdw-Front

9945-01-Door-DET1

9945-01-Door-Back

9945-01-Door-DET2-

I sized and aligned the finished image to the original antique door by matching the edges of grillwork.  It looks like i didn’t pull the door on the right down enough, but it is actually that the frame for the glass impinges on the grillwork.  Matched like this makes it easier to see the difference in the before and after.

9945-01 comparison

And then one more look at the door installed.  Niiice…

9945-01-INSTALL

Our next door was covered in minute detail in a previous post, And Away We Go, so I will be brief and say that the doors were created using the following three doors.

9962-04-Door-01004449

9962-04-Door-01004450

9962-04-Door-08000042The folding doors are fitted with hammered antique tin and set into a surround inlaid with antique carved panels, also from the above doors.

9962-04-Folding-DoorThe surround makes the doors even more remarkable, just as the right frame completes a painting.

9978-08-Install

Our next piece is actually an interior window, and again, it is set into an intricate surround.  It really opens up the room, making the kitchen/dining area (which we will get to see next entry!) feel bigger.

Here we have it in the finish shop, awaiting latches for the operable shutters.

9978-08-in-shopThat finish is so fabulous – you might want to click on the photo below to see the marvelous mix of blues and greens that create a smoky patina.  Just amazing.

9978-08-in-shop-detailHere is the front, out on the loading dock.

9978-08-Window-FrontYou can see that the front of the window has a slightly different finish – here comparing front and back.

9978-08-Window-DET6

9978-08-Window-back-DETHere is the back on the dock.

9978-08-Window-back-2And finally, installed, with the shutters open.

9978-08-Install-Detail

See you back here soon for the kitchen!

No two pieces are the same.

Contact us to get started designing your custom door, gate, furniture or other unique items.

Get Started

Related Projects

No related projects found